GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Allen Bradley - Drives |
| Product Type: | Drive |
| Part Number: | 2094-BM01-S |
| Series: | Kinetix 6000 |
| UPC: | 820919595707 |
Description:
Allen-Bradley designed and manufactured the 2094BM01S Kinetix 6000 axis module. This module has a voltage rating of 400 volts AC. When operating continuously, this module has a rated current of 6.1 amperes, while at peak performance, the rated current is 9.2 amperes. This axis module has a rated power dissipation of 57 to 126 watts. The nominal output power of this module is 3.6 kilowatts. This device has physical dimensions that measure 280 mm x 270 mm x 72 mm.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2094-BM01-S is an axis module manufactured by Allen-Bradley/Rockwell Automation as part of the Kinetix 6000 multi-axis servo drive product family. The drive comes in a compact modular design that enhances efficient use of time and resources. The best thing about the Allen-Bradley 2094-BM01-S module is that the design and layout of the wiring and the entire system are as simple as possible. It belongs to the voltage class of 400 volts same as AM modules voltage class. It comes with a continuous power output of 3.9 kilowatts, voltage rating of 460 volts, and an INV continuous current (RMS) of 9 amperes. Allen-Bradley's 2094-BM01-S axis module also features an ISO 13849-1 PLe/SIL3 certification, and it requires an external safety relay to help in compliance with the EN954-1, Category 3 industrial standards. It comes with the Safe Speed Monitoring functionality, which allows the operator to keep track of and reduce the application speed, thus boosting performance without shutting down the machine entirely.
Allen-Bradley's 2094-BM01-S axis module features enhanced system operation and performance safety. Its safety torque-off boosts productivity at the same time, decreasing the machine downtime as well as preventing restarts in case of a circuit trip. This Allen-Bradley drive comes with a multi-turn absolute encoder, which aids in maintaining the device position when there is a power failure. The 2094-BM01-S module's peak enhancement configuration deals with the motion applications requiring rapid deceleration and acceleration within a limited period. So, there will be a reduced number of axis modules required of the panel space requirements.
The Allen Bradley 2094-BM01-S is a Kinetix 6000 axis module. The 2094-BM01-S axis module is one of the critical components of the Kinetix drive motion system including the shunt, control, and integrated axis module. The 2094-BM01-S axis module is a part feedback system connected to feedback-controlled devices. The main purpose of a Kinetix drive is to allow users to change the speed and direction of rotation of a connected motor. This drive system provides precise and synchronized control, allowing motors and compatible motion devices to work as a single unit. The Allen Bradley 2094-BM01-S Kinetix 6000 axis module has a voltage rating of 400 volts AC and has a current rating of 6.1 amperes when operating continuously and 9.2 amperes at peak performance for a series A drive. The drive has a continuous power output of 5.6 kilowatts.
The manufacturer, Allen Bradley, recommends operating the 2094-BM01-S Axis module in an environment with a maximum ambient temperature of 50 degrees Celsius to avoid malfunctioning due to overheating. The relative humidity rating for this axis module is 5 to 95 percent non-condensing. The recommended mounting/operating altitude for the 2094-BM01-S axis module is 1000 meters. The 2094-BM01-S axis module measures 280 mm x 270 mm x 72 mm and has a weight of approximately 2.50 kilograms (5.5 lbs). The 2094-BM01-S axis module has a vibration rating of 5 to 55 hertz at 0.36 millimeters or 0.015 inches double amplitude. When configuring or installing the device, the manufacturer recommends following the provided guidelines or hiring a professional to proceed with such tasks.
Technical Specifications
| Manufacturer | Rockwell Automation |
| Brand | Allen-Bradley |
| Part Number | 2094-BM01-S |
| Series | Kinetix 6000 |
| Module Type | Nominal Input Voltage |
| 650 Volts DC | Continous Current RMS |
| 6.1 Amperes | Continous Current (0-peak) |
| 8.6 Amperes | Bandwidth Velocity Loop |
| 500 Hertz | Bandwidth Current Loop |
| 1300 Hertz | Internal Shunt (Continuous Power) |
| 50 Watts | Internal Shunt (Peak Power) |
| 5.6 Kilowatts | Internal Shunt Resistor |
| 115 Ohms | Efficiency |
| 98 percent | Weight |
FAQ
Question: Does Automation Stop offer repairs on the 2094-BM01-S?
Answer: Yes. We offer repairs for the 2094-BM01-S and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2094-BM01-S?
Answer: If you buy the 2094-BM01-S through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2094-BM01-S online?
Answer: Yes. Automation Stop sells the 2094-BM01-S online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2094-BM01-S?
Answer: The 2094-BM01-S is made by Allen Bradley - Drives.
Question: What type of product is the 2094-BM01-S?
Answer: The 2094-BM01-S is part of the Kinetix 6000 series.
Question: What 115 Ohms are included with the Allen Bradley 2094-BM01-S?
Answer: The Allen Bradley 2094-BM01-S includes Efficiency for its 115 Ohms.
Question: What 1300 Hertz does the Allen Bradley-Rockwell Automation 2094-BM01-S have?
Answer: The 2094-BM01-S has a Internal Shunt (Continuous Power) 1300 Hertz.
Question: What 5.6 Kilowatts are included with the 2094-BM01-S?
Answer: The Allen Bradley-Rockwell Automation 2094-BM01-S includes Internal Shunt Resistor for its 5.6 Kilowatts.
Question: What kind of 50 Watts does the 2094-BM01-S have?
Answer: The Allen Bradley 2094-BM01-S has 50 Watts Internal Shunt (Peak Power).
Question: What 500 Hertz is included with the Rockwell Automation 2094-BM01-S?
Answer: The Rockwell Automation 2094-BM01-S has a Bandwidth Current Loop 500 Hertz.
Question: What 6.1 Amperes does the 2094-BM01-S have?
Answer: The Allen Bradley-Rockwell Automation 2094-BM01-S has a 6.1 Amperes of Continous Current (0-peak).
Question: What 650 Volts direct current does the 2094-BM01-S have?
Answer: The Rockwell Automation 2094-BM01-S has a Continous Current RMS 650 Volts DC.
Question: What kind of 8.6 Amperes does the 2094-BM01-S have?
Answer: The 2094-BM01-S includes Bandwidth Velocity Loop for its 8.6 Amperes.
Question: What 98 percent does the Rockwell-Automation 2094-BM01-S have?
Answer: The Rockwell-Automation 2094-BM01-S has a Weight 98 percent.
Question: What Brand does the Allen-Bradley 2094-BM01-S have?
Answer: The 2094-BM01-S has a Allen Bradley Brand.
Question: Does the 2094-BM01-S have a Module Type?
Answer: Nominal Input Voltage.
Question: What unit Number does the 2094-BM01-S have?
Answer: The 2094-BM01-S has a unit Number of 2094-BM01-S.
Series information for 2094-BM01-S
For additional information about 2094-BM01-S check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2094-BM01-S.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| 2094-BM01-S/A | 2094-BM01-S Ser A, Series A, Rev A | Request a Quote |
| 2094-BM01-S/B | 2094-BM01-S Ser B, Series B, Rev B | Request a Quote |
| 2094-BM01-S/C | 2094-BM01-S Ser C, Series C, Rev C | Request a Quote |
| 2094-BM01-S/D | 2094-BM01-S Ser D, Series D, Rev D | Request a Quote |
Common Misspellings:
- 2094-BM01-5
- 2094-BM0I-S
- 2094-BM0I-5
- 2094-BMO1-S
- 2094-BMO1-5
- 2094-BMOI-S
- 2094-BMOI-5
- 2094-8M01-S
- 2094-8M01-5
- 2094-8M0I-S
- 2094-8M0I-5
- 2094-8MO1-S
- 2094-8MO1-5
- 2094-8MOI-S
- 2094-8MOI-5
- 2O94-BM01-S
- 2O94-BM01-5
- 2O94-BM0I-S
- 2O94-BM0I-5
- 2O94-BMO1-S
- 2O94-BMO1-5
- 2O94-BMOI-S
- 2O94-BMOI-5
- 2O94-8M01-S
- 2O94-8M01-5
- 2O94-8M0I-S
- 2O94-8M0I-5
- 2O94-8MO1-S
- 2O94-8MO1-5
- 2O94-8MOI-S
- 2O94-8MOI-5
