GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2080-LC50-24QBB |
Series: | Micro 850 |
Description:
This Micro 850 controller is ideal for use in small and easy industrial processes. However, it can be programmed to take on a wide range of industrial applications. It needs to be supplied with a voltage in the range of 14-24 volts. It can both work with direct and alternate current. This controller can work with both stranded and solid wires. It supports 24 AWG and 14 AWG wires. However, whatever users might use with this controller, it must come with insulation against a maximum temperature of 90 degrees celsius. There are two communication ports, two power ports, and two signal ports on this controller.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2080-LC50-24QBB is a compact controller. It is designed and manufactured by Allen-Bradley. It belongs to the Micro 850 line of PLCs. The Micro850 controller comes with many advanced features starting with its removable terminal blocks, space-saving plug-in, and additional expansion I/O modules. Furthermore, the Micro850 controller comes with one input that supports 14-24 volts in direct current or alternate current, one output that supports 14-24 volts in direct current or alternate current, an ethernet port, a maximum of four HSC outputs, one embedded USB port for programming and configuration, three plug-in ports, and a non-isolated RS-232 serial port & RS-485 port. The Micro 850 comes with EtherNet/IPTM for connected components. This controller also comes with a client messaging feature. Communications with other controllers are established using symbolic addressing. For power, it requires a power input of 8 watts. It requires 28 watts when used with plug-ins and expansion I/O channels. It consists of 10K program steps. There are 20 kilobytes of storage data on this module. This module should be operated within a temperature range of -20 degrees celsius to 65 degrees celsius. It comes with support for a maximum of four two-wire HSCs. Its dimensions are (H x W x D) 90 millimeters x 158 millimeters x 80 millimeters. Its shipping weight is 0.423 kilograms (0.933 pounds). This compact controller uses an output circuit type that needs to be connected to a 24 volts direct current power source.
Question: Does Automation Stop offer repairs on the 2080-LC50-24QBB?
Answer: Yes. We offer repairs for the 2080-LC50-24QBB and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2080-LC50-24QBB?
Answer: If you buy the 2080-LC50-24QBB through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2080-LC50-24QBB online?
Answer: Yes. Automation Stop sells the 2080-LC50-24QBB online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2080-LC50-24QBB?
Answer: The 2080-LC50-24QBB is made by Allen Bradley - Drives.
Question: What type of product is the 2080-LC50-24QBB?
Answer: The 2080-LC50-24QBB is part of the Micro 850 series.
For additional information about 2080-LC50-24QBB check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2080-LC50-24QBB.
Revision Part # | Also Known As | Availability |
---|---|---|
2080-LC50-24QBB/A | 2080-LC50-24QBB Ser A, Series A, Rev A | Request a Quote |
2080-LC50-24QBB/B | 2080-LC50-24QBB Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.