GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2080-LC30-24QWB |
Series: | Micro 830 |
UPC: | 10885630058259 |
Description:
The Allen-Bradley/Rockwell Automation 2080-LC30-24QWB programmable controller is part of the Micro 830 series. The Allen Bradley Micro830 Programmable Logic Controller is a smart control system that provides maximum dependability, customization, and security. The 2080-LC30-24QWB PLC features 24 digital I/O, including ten relay outputs and fourteen 24 Vac/Vdc inputs. It comes with a built-in 24V DC power supply and three base plug-in ports. It can accommodate up to 4 (2-wire) HSC and operates in the range of -4°F to 149 °F.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2080-LC30-24QWB controller has 830 microcontrollers in it, which is a brick style economical controller with embedded I/O. The controller 24 I/O, 14 of which are input and the remained 10 are outputs. This device has a standard input circuit type of 12/24 V sink/source and high-speed circuit of 24 V sink/source and both with relay outputs. The power consumption is 12.32 W (watts) and it supports event interrupts. It uses the solid copper wire of 0.2 mm² and 2.5 mm² and rated up to 194 °F max insulation. The dimensions of this module, when measured out, are 3.54 inches x 5.91 inches x 3.15 inches. The weight of this module is approximately 0.933 pounds (lbs.). The isolation voltage of this Allen-Bradley module is two hundred and fifty (250) volts. Additionally, the pilot duty rating of this product is C300 and R150 and the insulation stripping length is 0.28 inches. This module has eight (8) high speed DC inputs from input0 to input7 and 7 standard speed DC inputs from input8 to input13. Both of the category’s support up to twenty-four (24) volt DC sink/source. The module comes with a nominal impedance of 3 KΩ and 3.74 KΩ for high-speed input and standard input respectively, and 8 ms input filtering for all inputs. This Allen-Bradley module also has ten (10) relay outputs, which output five (5) to one hundred and twenty-five (125) volts DC and five (5) to two hundred and sixty-five (265) volts AC voltage. It comes with non-operating and operating temperature ranges of about -40 to 85℉ and -4 to 149℉ respectively, with a relative humidity range of 5 to 95%.
Question: Does Automation Stop offer repairs on the 2080-LC30-24QWB?
Answer: Yes. We offer repairs for the 2080-LC30-24QWB and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2080-LC30-24QWB?
Answer: If you buy the 2080-LC30-24QWB through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2080-LC30-24QWB online?
Answer: Yes. Automation Stop sells the 2080-LC30-24QWB online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2080-LC30-24QWB?
Answer: The 2080-LC30-24QWB is made by Allen Bradley - Drives.
Question: What type of product is the 2080-LC30-24QWB?
Answer: The 2080-LC30-24QWB is part of the Micro 830 series.
For additional information about 2080-LC30-24QWB check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2080-LC30-24QWB.
Revision Part # | Also Known As | Availability |
---|---|---|
2080-LC30-24QWB/A | 2080-LC30-24QWB Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.