GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 2080-LC20-20QBB |
Series: | Micro 820 |
UPC: | 885630982588 |
Description:
This module is an Allen Bradley programmable logic controller from the 820 Micro series. These series represent the 20-point PLC modules. It can support various power supply ranges through its diverse points. In addition, it also includes an IP20 rating for indoor use. This PLC can dissipate the total power of 6 watts, while the max power supply is 26.4 volts DC. The non-isolated DC input on-state voltage range of this device is 9.8 to 26.4 volts DC.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 2080-LC20-20QBB is a PLC unit. It is also known as a programmable logic controller. This device was designed, as well as produced, by Allen Bradley / Rockwell Automation. This model belongs to the 820 Micro series of products that features 20-point PLC modules. The input power supply requirements of this PLC are 12 points for a 24-volt DC source. This module's output voltage power range is 7 points for a 24-volt DC source, and the remaining 1 point is an analog out. This programmable logic controller has 20 points designated for its power source supplies, and it can operate on 24 volts DC. Additionally, this PLC has a power dissipation rating of 6 watts. However, the power supply voltage range for class 2 is 20.4 to 26.4 volts DC. As far as the IP rating of this PLC unit is concerned, it is housed with the IP20, which might not be ideal for outdoor use, however it can shield the unit for the appropriate indoor use with the right environmental ranges. Aside from that, the non-isolated DC input on-state voltage range on this PLC is 9.8 to 26.4 volts DC. The terminal blocks on this model are fixed. This kind of workbench allows this module to select many powerful programs such as Block diagram, PID loop, and some of the user defined function sets to be used directly.
Question: Does Automation Stop offer repairs on the 2080-LC20-20QBB?
Answer: Yes. We offer repairs for the 2080-LC20-20QBB and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 2080-LC20-20QBB?
Answer: If you buy the 2080-LC20-20QBB through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2080-LC20-20QBB online?
Answer: Yes. Automation Stop sells the 2080-LC20-20QBB online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2080-LC20-20QBB?
Answer: The 2080-LC20-20QBB is made by Allen Bradley - Drives.
Question: What type of product is the 2080-LC20-20QBB?
Answer: The 2080-LC20-20QBB is part of the Micro 820 series.
For additional information about 2080-LC20-20QBB check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2080-LC20-20QBB.
Revision Part # | Also Known As | Availability |
---|---|---|
2080-LC20-20QBB/A | 2080-LC20-20QBB Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.