GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1394C-SJT10-D

Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 1394C-SJT10-D
Series: Servo Controllers

Description:

The Allen-Bradley 1394C-SJT10-D is equipped with 4-axes and a 3-phase input. It has a capacitance rating of 345 microfarad and an inductance of 750 microfarad. The voltage rating for this Allen-Bradley device ranges from 324 to 528 volts alternating current (AC) at 50/60 hertz. This device has a line-loss ride-through of 20 milliseconds and an 80-ohm resistor which limits the 8 ampere peak inrush current it originally has. An internal shunt resistor is also installed within the device. This device weighs approximately 23.5 pounds.


Key Features:

  • is a system
  • has input voltage of 50-60 hertz

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The SERCOS interface system module 1394C-SJT10-D comes pre-installed with 4-axes and a 3-phase input, as well as elevated SERCOS communication, ring-rates, and SERCOS Network option. Plugs that suit the connectors are utilized to link the primary input power and logic-power. The primary input power, shunt-power, logic-power, one point bar, feedback (motor/auxiliary), discrete-input, SERCOS send/receive, and the DPI / SCANport are just a few of the connections in this Allen-Bradley device. 

The 1394C-SJT10-D control system has an efficiency rating of ninety-nine (99) percent. It also comes with an inbuilt shunt resistor. This device has a thirteen (13) ampere input current, a 14.73 ampere continuous current output, and 29.46 amperes of current output. The rated voltage span of this device is 324 volts AC to 528 volts AC at a frequency of 60 hertz (Hz), along with consisting a 20 ms line loss ride through along with a resistor of 80-ohm which limits this Allen-Bradley module's original eight (8) ampere inrush current. The capacitance rating of this Allen-Bradley device is 345 microfarad while the inductance is 750 microfarad. This Allen-Bradley device has 14.73 amperes of the continuous output of current while consisting of 29.46 amperes of intermittent current of output. Furthermore, this SERCOS interface system module has a nominal BUS voltage of 530 volts direct current (DC) to 680 direct current (DC). The amount of maximum and continuous power generated by this Allen-Bradley module is twenty-eight (28) kilowatts (kW) and eight (8) to ten (10) kilowatts, respectively. The Allen-Bradley 1394C-SJT10-D has a weight of approximately 23.5 pounds.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1394C-SJT10-D?

Answer: Yes. We offer repairs for the 1394C-SJT10-D and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 1394C-SJT10-D?

Answer: If you buy the 1394C-SJT10-D through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1394C-SJT10-D online?

Answer: Yes. Automation Stop sells the 1394C-SJT10-D online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1394C-SJT10-D?

Answer: The 1394C-SJT10-D is made by Allen Bradley - Drives.


Question: What type of product is the 1394C-SJT10-D?

Answer: The 1394C-SJT10-D is part of the Servo Controllers series.


Question: What kilowattage is included with the Allen Bradley - Drives 1394C-SJT10-D?

Answer: The 1394C-SJT10-D has a kilowattage of 10.


Series information for 1394C-SJT10-D

For additional information about 1394C-SJT10-D check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1394C-SJT10-D.

Revision Part # Also Known As Availability
1394C-SJT10-D/A 1394C-SJT10-D Ser A, Series A, Rev A Request a Quote
1394C-SJT10-D/B 1394C-SJT10-D Ser B, Series B, Rev B Request a Quote
1394C-SJT10-D/C 1394C-SJT10-D Ser C, Series C, Rev C Request a Quote
1394C-SJT10-D/D 1394C-SJT10-D Ser D, Series D, Rev D Request a Quote

Common Misspellings:

  • 1394C-SJT1O-D
  • 1394C-SJTI0-D
  • 1394C-SJTIO-D
  • 1394C-5JT10-D
  • 1394C-5JT1O-D
  • 1394C-5JTI0-D
  • 1394C-5JTIO-D
  • I394C-SJT10-D
  • I394C-SJT1O-D
  • I394C-SJTI0-D
  • I394C-SJTIO-D
  • I394C-5JT10-D
  • I394C-5JT1O-D
  • I394C-5JTI0-D
  • I394C-5JTIO-D

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP