GE / IP FANUC Series 90/30 In Stock
1394C-SJT10-C-RL
| Manufacturer: | Allen Bradley - Drives |
| Product Type: | Drive |
| Part Number: | 1394C-SJT10-C-RL |
| Series: | Servo Controllers |
Description:
This controller module is from Allen-Bradley's 1394 family of servo controllers and components. This Allen-Bradley / Rockwell Automation's 1394C-SJT10-C-RL controller module is designed for use in servo systems. The controller module 1394C-SJT10-C-RL has a 10 kilowatt power rating. It features a three-phase operational voltage range of 380/460 volts alternating current (AC) and a frequency range of 50/60 hertz. This controller module's rated max over/under-voltage is 100,000 amperes, a 14.7 ampere rated continuous current, and a 29.5 ampere rated max current. The 1394C-SJT10-C-RL controller has an efficiency rating of 99 percent.
Key Features:
- is a system
- contains input voltage of 360-480ac volts
- incorporates dimensions of 13.8 x 11.0 x 5.91 in (350 x 280 x 150 mm)
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1394C-SJT10-C-RL motor control device is a 4-axis device with 4 auxiliary encoding inputs that includes RIO (Universal Remote), Input/Output, and Axis-Link. Allen-Bradley makes the servo controller. This Allen-Bradley controller, which is also a ten (10) kilowatt controller that operates on a three-phase system for electricity, offers terminations, electromagnetic interference filtering, and smart power. The 1394C-SJT10-C-RL utilizes a twenty-four (24) volt alternating current (AC) power supply, a disconnect feature, a fuse block, a contactor, and thermal contacts, among other features. It can function between voltages of 324 and 528 volts alternating current for unexpected variable input levels.
The 1394C-SJT10-C-RL can handle a wide array of system inactivity thanks to its digitally adjustable loop correction for velocity and current. The module has a 14.73 ampere continuous current output and a twenty (20) millisecond line-loss ride-through, indicating that it is 99 percent efficient. Transitory voltage, electric malfunction, and ground-error contact protection are all built into the 1394C-SJT10-C-RL. This module includes all of the required advanced safety features, such as overload tolerance, current regulation, and insulated-gate bipolar transistor technology for quiet operation. Its size is 13.8 x 11.0 x 5.91 inches and weighs approximately 23.5 pounds. It produces an 8 kilowatt continuous out of power when connected to a source of 380 volts, and a 10 kilowatt continuous output of power when connected to a source of 460 volts. As a result, the 1394C-SJT10-C-AC-RL's alternating current input is thirteen (13) amperes. It has a twenty-eight (28) kilowatt max output of power and an internal shunt resistor of 200 watts.
FAQ
Question: Does Automation Stop offer repairs on the 1394C-SJT10-C-RL?
Answer: Yes. We offer repairs for the 1394C-SJT10-C-RL and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 1394C-SJT10-C-RL?
Answer: If you buy the 1394C-SJT10-C-RL through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1394C-SJT10-C-RL online?
Answer: Yes. Automation Stop sells the 1394C-SJT10-C-RL online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1394C-SJT10-C-RL?
Answer: The 1394C-SJT10-C-RL is made by Allen Bradley - Drives.
Question: What type of product is the 1394C-SJT10-C-RL?
Answer: The 1394C-SJT10-C-RL is part of the Servo Controllers series.
Question: What kilowattage is included with the 1394C-SJT10-C-RL?
Answer: The 1394C-SJT10-C-RL includes a kilowattage of 10.
Series information for 1394C-SJT10-C-RL
For additional information about 1394C-SJT10-C-RL check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1394C-SJT10-C-RL.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| 1394C-SJT10-C-RL/A | 1394C-SJT10-C-RL Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
- 1394C-SJT1O-C-RL
- 1394C-SJTI0-C-RL
- 1394C-SJTIO-C-RL
- 1394C-5JT10-C-RL
- 1394C-5JT1O-C-RL
- 1394C-5JTI0-C-RL
- 1394C-5JTIO-C-RL
- I394C-SJT10-C-RL
- I394C-SJT1O-C-RL
- I394C-SJTI0-C-RL
- I394C-SJTIO-C-RL
- I394C-5JT10-C-RL
- I394C-5JT1O-C-RL
- I394C-5JTI0-C-RL
- I394C-5JTIO-C-RL
