GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Allen Bradley - Drives |
| Product Type: | Drive |
| Part Number: | 1394C-AM75 |
| Series: | Servo Controllers |
Description:
A crucial component in Allen-Bradley 1394 industrial servo systems is the 1394C-AM75 axis module from the Bulletin 1394 servo controllers series. This axis module includes a heatsink, electromagnetic interference filtering, and strengthened terminations. To work as part of the 1394 servo system, the 1394C-AM75 axis module must be attached to a 1394 system module. A module-to-module connection or a slide and lock connection can be used to connect to the system module. The operational efficiency of the 1394C-AM75 axis module is assessed at 98 percent.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The servo axis amplifier 1394C-AM75 controller by Allen-Bradley comes with an output rating of 23.8 kilowatts, an input voltage of 530-680 DC, an output of 35 A, an inside cabinet heatsink, EMI filtering, as well as termination series enhancements. The controller is Bulletin 2094 LIM. This series makes it simpler to replace various important input power components. This bulletin series also lessens the amount of wiring that is needed and helps operators save panel space. The line interface module three-phase systems develop and regulate alternate-source and main power (230 V). The modules, axis, and system can be connected by using device-to-device connections and/or slid and lock. The rest of the important supplies are inclusive of 24 volts of alternating or direct current. The system modules' ratings range from 5 to 10 and 22 kW, respectively, at 460 volts. System modules also contain a PCB for system command. The fact that 5 and 10 kW system modules feature an internally built shunt-resistor with a continuous rating of 200 watts and a maximum rating of 40,000 watts is essential to keep in mind. An externally built-in shunt-resistor kit is available for these systems, as well as reforming wattages exceeding the capacity of the 200 W internal-Rsh (shunt-resistor). Usually, an Rsh (shunt-resistor) is not needed with most 5 and 10 kW systems, although this 22-kilowatt gadget does need an external shunt-resistor. The 15.44 pounds module measures 13.8 x 11.0 x 2.95 inches in height by width by depth. The 1394C-AM75 has a speed regulation rating of 0 to 0.05% of base speed with 100% torque disturbance.
FAQ
Question: Does Automation Stop offer repairs on the 1394C-AM75?
Answer: Yes. We offer repairs for the 1394C-AM75 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 1394C-AM75?
Answer: If you buy the 1394C-AM75 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1394C-AM75 online?
Answer: Yes. Automation Stop sells the 1394C-AM75 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1394C-AM75?
Answer: The 1394C-AM75 is made by Allen Bradley - Drives.
Question: What type of product is the 1394C-AM75?
Answer: The 1394C-AM75 is part of the Servo Controllers series.
Question: What kilowattage is included with the 1394C-AM75?
Answer: The 1394C-AM75 by Allen Bradley - Drives has a kilowattage of 23.8.
Question: What amperage does the 1394C-AM75 have?
Answer: The 1394C-AM75 by Allen Bradley - Drives has a amperage of 35.
Series information for 1394C-AM75
For additional information about 1394C-AM75 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1394C-AM75.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| 1394C-AM75/A | 1394C-AM75 Ser A, Series A, Rev A | Request a Quote |
| 1394C-AM75/B | 1394C-AM75 Ser B, Series B, Rev B | Request a Quote |
| 1394C-AM75/C | 1394C-AM75 Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
- 1394C-AM7S
- I394C-AM75
- I394C-AM7S
