GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1394C-AM04

✓ In Stock

Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 1394C-AM04
Series: Servo Controllers
UPC: 662453682259

Description:

The 1394C-AM04 is a servo drive axis module from Allen-Bradley / Rockwell Automation. The module has a nominal input voltage of 530 to 680 volts DC. Additionally, this device has an efficiency rating of 98 percent. The module has dimensions of 350 x 280 x 50 millimeters, and it weighs approximately 5 kilograms. This servo drive module has a metal enclosure type that provides protection to the internals of the module. This module supports single-phase input.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 1394C-AM04 is a servo drive axis module from Allen-Bradley / Rockwell Automation. This drive has an efficiency rating of 98% and requires an operating voltage of 530 to 680 volts DC (direct current). The 1394C-AM04 is a servo drive axis module that can regulate its base speed by 0 to 0.05 percent when at 100 percent torque disturbance. The main purpose of this module is to convert input DC (direct current) power from the system into a variable AC (alternating current) voltage. The output of the drive can be adjusted in terms of phase, frequency, and amplitude. The 1394C-AM04 is used in applications where controlling the speed, torque, and direction of a compatible servo motor is required. This servo drive axis module must be installed in a well-maintained area to avoid impacting its performance and the module must be operating in an environment with a maximum ambient temperature of fifty-five (55) degrees Celsius to avoid overheating. The metal enclosure of the drive axis module provides rigid support and protection to the internal circuitry. This module's physical dimensions measure 352 mm x 281 mm x 50 mm, and it weighs approximately 5 kilograms. The static gain on the 1394C-AM04 is 2.6 amperes per millivolts rms. It has a peak current adjustment of 200 percent. A modulation frequency of 5 kilohertz +/- 10 %. The drift on the 1394C-AM04 is 0.03 rotations per minute per degree Celsius. The nominal continuous power output offered at 360 to 460 volts is 2.4 to 3 kilowatts. The module has a capacitance rating of 110 micro Farads.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1394C-AM04?

Answer: Yes. We offer repairs for the 1394C-AM04 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 1394C-AM04?

Answer: If you buy the 1394C-AM04 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1394C-AM04 online?

Answer: Yes. Automation Stop sells the 1394C-AM04 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1394C-AM04?

Answer: The 1394C-AM04 is made by Allen Bradley - Drives.


Question: What type of product is the 1394C-AM04?

Answer: The 1394C-AM04 is part of the Servo Controllers series.


Question: What kilowattage does the 1394C-AM04 have?

Answer: The 1394C-AM04 has a kilowattage of 3.


Question: What amperage is included with the Allen Bradley - Drives 1394C-AM04?

Answer: The 1394C-AM04 by Allen Bradley - Drives has a amperage of 4.5-9.


Series information for 1394C-AM04

For additional information about 1394C-AM04 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1394C-AM04.

Revision Part # Also Known As Availability
1394C-AM04/A 1394C-AM04 Ser A, Series A, Rev A Request a Quote
1394C-AM04/B 1394C-AM04 Ser B, Series B, Rev B Request a Quote
1394C-AM04/C 1394C-AM04 Ser C, Series C, Rev C Request a Quote

Common Misspellings:

  • 1394C-AMO4
  • I394C-AM04
  • I394C-AMO4

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP