GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1394C-AM03

✓ In Stock

Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 1394C-AM03
Series: Servo Controllers
UPC: 662453682242

Description:

The Allen-Bradley 1394C-AM03 is a multi-axis servo controller. It has superior safety features such as soft current limiting and overload tolerance. It has a power output rating of 2 kilowatts and is CUL-approved and UL-listed. This device also has a current meter, a feedback signal monitor, and thermal overload detection. Soft current limiting and overload tolerant operation are two (2) of the sophisticated safety features included. This module does not require wire harnesses or bus bars since it employs slide-and-lock connections for smooth system integration.


Key Features:

  • is a servo (axis) amplifier
  • provides dimensions of 13.8 x 11.0 x 1.97 in (350 x 280 x 50 mm)

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Allen-Bradley's 1394C-AM03 is a three-phase multi-axis module. It is CUL-listed and CUL-certified. Current loop compensation and digitally controlled velocity, both of which take system inertia into account, are included in this module's control features. Digital fault utilities and digital diagnostic functions are also included in this module. A current monitor, a feedback signal monitor, and thermal overload detection are also included in this device. Soft current limiting and overload tolerant functioning are among the advanced safety measures incorporated. Because it uses slide-and-lock connectors for seamless system integration, this module does not require wiring harnesses or bus bars. To connect to plant floor networks, the 1394C-AM03 axis module incorporates extensive I/O functions and communication routes. With a nominal input voltage of 530 to 680 volts DC, this module is rated for 2 kilowatts of power. For this module with a controller, the static gain is 1.28 RMS A/V. This unit has a continuous current power output of 1.62 to 2 kilowatts at 360 to 460 volts nominal voltage and is rated for 3 amperes of continuous current. The module features a capacitance rating of 110 microfarads and a 200 percent current limit adjustment. If this module is not likely to be used soon, it must be stored in a hygienic, dry area with an average temperature range of approximately 0 to 65 degrees Celsius (32 to 149 °F) and a relative humidity range of 5 percent to 95 percent, non-condensing. Additionally, it should be placed inside a space that will not expose it to a corrosive atmosphere.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1394C-AM03?

Answer: Yes. We offer repairs for the 1394C-AM03 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 1394C-AM03?

Answer: If you buy the 1394C-AM03 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1394C-AM03 online?

Answer: Yes. Automation Stop sells the 1394C-AM03 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1394C-AM03?

Answer: The 1394C-AM03 is made by Allen Bradley - Drives.


Question: What type of product is the 1394C-AM03?

Answer: The 1394C-AM03 is part of the Servo Controllers series.


Question: What kilowattage is included with the 1394C-AM03?

Answer: The 1394C-AM03 has a kilowattage of 2.


Question: What amperage does the 1394C-AM03 have?

Answer: The 1394C-AM03 has a amperage of 3.2.


Series information for 1394C-AM03

For additional information about 1394C-AM03 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1394C-AM03.

Revision Part # Also Known As Availability
1394C-AM03/A 1394C-AM03 Ser A, Series A, Rev A Request a Quote
1394C-AM03/B 1394C-AM03 Ser B, Series B, Rev B Request a Quote
1394C-AM03/C 1394C-AM03 Ser C, Series C, Rev C Request a Quote

Common Misspellings:

  • 1394C-AMO3
  • I394C-AM03
  • I394C-AMO3

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP