GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1394-AM75

1394-AM75 Image 1 thumbnail
1394-AM75 Image 2 thumbnail
1394-AM75 Image 3 thumbnail
Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 1394-AM75
Series: Servo Controllers

Description:

The Allen-Bradley 1394-AM75 is considered as a servo amplifier module that is employed with servo motors for either single or multi-axis control. This module supports an input voltage range from 530 volts DC to 680 volts DC and current consumption of 35 amperes. The servo module provides a continuous power output of 23.8 kilowatts. This unit weighs approximately 7 kilograms (15.44 pounds) while shipping.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 1394-AM75 is considered as a servo amplifier module that is employed with servo motors for either single or multi-axis control without series C improvements. This module can be mounted next to a system module. The axis module contains terminals at the bottom and has three PE connectors for grounding the system. The 1394-AM75 provides a continuous power output of 23.8 kilowatts. This module supports an input voltage range from 530 volts DC to 680 volts DC and current consumption of 35 amperes. The device offers a speed regulation from 0 percent to 0.05 percent of the base velocity with 100 percent torque disturbance. This amplifier module provides a static gain of 22.8 amperes per one millivolt and a modulation frequency of 5 kilohertz with an accuracy of ±10 percent.

The 1394-AM75 has a drift of 0.03 revolution per minute per one degree Celsius. The module offers an efficiency of 98 percent. This servo module has a capacitance of 660 microfarads and supports a peak current of 50 amperes for one second. The module is conceived to be installed with the rear heat sink that is extended outside the customer-supplied package. This servo amplifier module contains motor power connections at the faceplate. The 1394-AM75 includes motor brake and thermal connections at the bottom. This unit can operate at a temperature range of 0 degrees to 50 degrees Celsius (32 degrees to 122 degrees Fahrenheit) and a noncondensing relative humidity range from 5 percent to 95 percent for industrial applications. The 1394-AM75 weighs approximately 7 kilograms (15.44 pounds) while shipping.

Technical Specifications

Brand Allen-Bradley / Rockwell Automation
Series 1394 axis module
Part Number 1394-AM75
Description Servo (axis) amplifier module
Nominal input voltage 530/680 volts DC
Continuous current (rms) 35 amperes
Peak current (rms - 1 second) 50 amperes
Continuous power out 17.8/23.8 kW
Efficiency 98%
Capacitance 660 μF
Drift 0.03 rpm/degree C
Modulation frequency 5 kHz ±10%
Peak current limit adjust 143%
Speed regulation 0 to 0.05% of base speed with 100% torque disturbance
Weight 7 kg (15.44 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1394-AM75?

Answer: Yes. We offer repairs for the 1394-AM75 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 1394-AM75?

Answer: If you buy the 1394-AM75 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1394-AM75 online?

Answer: Yes. Automation Stop sells the 1394-AM75 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1394-AM75?

Answer: The 1394-AM75 is made by Allen Bradley - Drives.


Question: What type of product is the 1394-AM75?

Answer: The 1394-AM75 is part of the Servo Controllers series.


Question: What Brand does the 1394-AM75 have?

Answer: The Allen Bradley-Rockwell Automation 1394-AM75 has a AB / Rockwell Automation Brand.


Question: What Capacitance does the Allen-Bradley 1394-AM75 have?

Answer: The Capacitance of the Allen-Bradley 1394-AM75 is 660 μF.


Question: What Continuous current (rms) does the 1394-AM75 have?

Answer: The 1394-AM75 has a Continuous current (rms) of 35 amperes.


Question: What is the Continuous power out of the 1394-AM75?

Answer: The Rockwell Automation 1394-AM75 has a Continuous power out of 17.8/23.8 kW.


Question: What Description is included with the 1394-AM75?

Answer: The 1394-AM75 has a Servo (axis) amplifier module Description.


Question: What is the Drift of the 1394-AM75?

Answer: The Drift of the Allen Bradley Automation 1394-AM75 is 0.03 revolutions per minute (RPM)/degree C.


Question: What is the Efficiency of the 1394-AM75?

Answer: The 1394-AM75 has a Efficiency of 98%.


Question: What is the Modulation frequency of the 1394-AM75?

Answer: The Modulation frequency of the Rockwell Automation 1394-AM75 is 5 kHz ±10%.


Question: What is the Nominal input voltage of the 1394-AM75?

Answer: The Nominal input voltage of the Rockwell-Automation 1394-AM75 is 530/680 volts DC (direct current).


Question: What unit Number does the Allen Bradley-Rockwell Automation 1394-AM75 have?

Answer: The unit Number of the 1394-AM75 is 1394-AM75.


Question: What is the Peak current (rms - 1 second) of the 1394-AM75?

Answer: The Peak current (rms - 1 second) of the 1394-AM75 is 50 amperes.


Question: What is the Peak current limit adjust of the 1394-AM75?

Answer: The Allen Bradley 1394-AM75 has a Peak current limit adjust of 143%.


Question: What is the Speed regulation of the 1394-AM75?

Answer: The Rockwell Automation 1394-AM75 has a Speed regulation of 0 to 0.05% of base speed with 100% torque disturbance.


Question: What Weight does the Rockwell-Automation 1394-AM75 have?

Answer: The 1394-AM75 has a Weight of 7 kg (15.44 lb).


Series information for 1394-AM75

For additional information about 1394-AM75 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1394-AM75.

Revision Part # Also Known As Availability
1394-AM75/A 1394-AM75 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1394-AM7S
  • I394-AM75
  • I394-AM7S

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP