GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 1391-DES45-DI-AQB |
Series: | AC Servo 1391 |
Description:
The 1391-DES45-DI-AQB is a Servo Controller drive that is part of the 1391 product family by Allen-Bradley. It has a rated Input voltage of 230 Volts AC, 3-Phase with an output current of 45.0 Amperes RMS Continuous and peak current of 90.0 Amperes. It also has an output power of 15.0 Kilowatts with peak output of 30.0 Kilowatts.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1391-DES45-DI-AQB is a Servo Controller drive that is part of the 1391 product family by Allen-Bradley. Drive specification ratings for the 1391-DES45-DI-AQB include a nominal bus voltage of 300 Volts DC, a continuous current (RMS) of 45 Amperes, and a peak current (RMS) of 90 Amperes. The 1391-DES45-DI-AQB has a continuous power output of 15.0 Kilowatts and a peak power output of 30.0 Kilowatts. It receives a 38 Ampere (RMS) input circuit breaker rating and has a circuit breaker interrupt rating (symmetrical Amperes) of 1300 Amperes. The approximate weight of this unit is 34 pounds (15.40 kilograms).
Additional specifications for the 1391-DES45-DI-AQB include a static gain (A/RMS) of 1.5 x Rated Motor Current / rpm (typical), and a form factor of 1.03 or less. It has a peak current limit adjust of 20 to 300% of rated motor current or 2 x continuous rating of drive (maximum). Drive efficiency is 85% (minimum at rated load) and it has a power factor of 95% minimum. The 1391-DES45-DI-AQB has a modular frequency of 2500 Hertz +/- 10% and a drift of 0.07 rpm/degrees Celsius maximum. Speed regulation is 0 to 0.05% of maximum motor speed with a 95% load change; the 1391-DES45-DI-AQB has an ambient temperature range between 0 and 60 degrees Celsius (32 to 140 degrees Fahrenheit) and a storage temperature between 0 and 65 degrees Celsius (32 to 149 degrees Fahrenheit). This hardware has a relative humidity rating of 5% to 95% (non-condensing) and a maximum allowable altitude of 1000 meters (3300 feet). Certifications for this controller include UL and CSA.
Brand | Allen-Bradley |
Part Number/Catalog No. | 1391-DES45-DI-AQB |
Product Family | 1391 Series |
Nominal Bus Voltage | 300 Volts DC |
Continuous Current (RMS) | 45 Amperes |
Peak Current (RMS) | 90 Amperes |
Continuous Power Output | 15.0 Kilowatts |
Peak Power Output | 30.0 Kilowatts |
Input Circuit Breaker Rating | 38 Amperes (RMS) |
Weight (Appx.) | 34 pounds (15.40 kilograms) |
Drive Efficiency | 85% (minimum at rated load) |
Power Factor | 95%, minimum |
Question: Does Automation Stop offer repairs on the 1391-DES45-DI-AQB?
Answer: Yes. We offer repairs for the 1391-DES45-DI-AQB and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 1391-DES45-DI-AQB?
Answer: If you buy the 1391-DES45-DI-AQB through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1391-DES45-DI-AQB online?
Answer: Yes. Automation Stop sells the 1391-DES45-DI-AQB online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1391-DES45-DI-AQB?
Answer: The 1391-DES45-DI-AQB is made by Allen Bradley - Drives.
Question: What type of product is the 1391-DES45-DI-AQB?
Answer: The 1391-DES45-DI-AQB is part of the AC Servo 1391 series.
Question: What Brand is included with the 1391-DES45-DI-AQB?
Answer: The 1391-DES45-DI-AQB has a AB Brand.
Question: What Continuous Current (RMS) does the Allen Bradley/Rockwell Automation 1391-DES45-DI-AQB have?
Answer: The Continuous Current (RMS) of the Allen Bradley/Rockwell Automation 1391-DES45-DI-AQB is 45 Amperes.
Question: What is the Continuous Power Output of the 1391-DES45-DI-AQB?
Answer: The Rockwell Automation 1391-DES45-DI-AQB has a Continuous Power Output of 15.0 Kilowatts.
Question: What is the Drive Efficiency of the Rockwell-Automation 1391-DES45-DI-AQB?
Answer: The Drive Efficiency of the Rockwell-Automation 1391-DES45-DI-AQB is 85% (minimum at rated load).
Question: What is the Input Circuit Breaker Rating of the 1391-DES45-DI-AQB?
Answer: The Input Circuit Breaker Rating of the 1391-DES45-DI-AQB is 38 Amperes (RMS).
Question: What Nominal Bus Voltage does the Allen Bradley/Rockwell Automation 1391-DES45-DI-AQB have?
Answer: The Nominal Bus Voltage of the Allen Bradley/Rockwell Automation 1391-DES45-DI-AQB is 300 Volts direct current.
Question: What part Number/Catalog No. does the Rockwell Automation 1391-DES45-DI-AQB have?
Answer: The component Number/Catalog No. of the 1391-DES45-DI-AQB is 1391-DES45-DI-AQB.
Question: What Peak Current (RMS) does the Allen Bradley 1391-DES45-DI-AQB have?
Answer: The Allen Bradley 1391-DES45-DI-AQB has a Peak Current (RMS) of 90 Amperes.
Question: What is the Peak Power Output of the 1391-DES45-DI-AQB?
Answer: The Peak Power Output of the Allen Bradley 1391-DES45-DI-AQB is 30.0 Kilowatts.
Question: What is the Power Factor of the 1391-DES45-DI-AQB?
Answer: The 1391-DES45-DI-AQB has a Power Factor of 95%, minimum.
Question: What is the Product Family of the 1391-DES45-DI-AQB?
Answer: The Product Family of the Allen Bradley Automation 1391-DES45-DI-AQB is 1391 Series.
Question: What is the Weight (Appx.) of the 1391-DES45-DI-AQB?
Answer: The Allen Bradley/Rockwell Automation 1391-DES45-DI-AQB has a Weight (Appx.) of 34 pounds (15.40 kilograms).
For additional information about 1391-DES45-DI-AQB check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1391-DES45-DI-AQB.
Revision Part # | Also Known As | Availability |
---|---|---|
1391-DES45-DI-AQB/A | 1391-DES45-DI-AQB Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.