GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 1365-PAN |
Series: | 1365 |
Description:
The 1365-PAN is a DC drive that is manufactured and produced by Allen-Bradley/Rockwell Automation. This drive belongs to the 1365 DC series of controllers. The maximum output power rating of this drive is 2 HP, and the armature voltage rating range from 90 to 180 volts DC. This drive also supports the frequency range of 50 to 60 Hz. The 1365-PAN has an input rating of 115 to 230 volts AC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This 1365-PAN is a DC drive and it is manufactured by Allen-Bradley/Rockwell Automation. The 1365-PAN is part of the 1365 DC controller series. This 1365-PAN drive is a compact as well as a flexible one. This drive has a 115 to 230 volts AC rating and a 10-ampere current rating. This 1365-PAN drive is built in an open chassis which can dissipate the heat and is also vulnerable to environmental damage. This 1365-PAN DC drive has a frequency rating from 50 to 60 Hz (Hertz). This drive is environmentally friendly, and it is made with the consideration of relative humidity levels 5 and 95%. This drive can be used at altitudes of up to 3300 feet above sea level with full power. This 1365-PAN DC drive is specially manufactured to operate at ambient temperature ranges from 0 to 55 degrees Celsius (32 to 131 degrees Fahrenheit). Also, this DC drive has an armature voltage rating from 90 to 180 volts DC. The output power of the Allen-Bradley drive is 0.25 to 1 HP at 90 volts DC, and it is 0.5 to 2 HP output power at 180 volts DC. This DC drive can be used only for indoor applications because of the open chassis. This DC drive unit is UL listed & certified by CSA. The primary application of these drives is the ability to control applications with instrument interfacing. This Allen-Bradley 1365-PAN DC drive uses permanent magnet technology and can be used as an optional tachometer for better speed regulation.
Question: Does Automation Stop offer repairs on the 1365-PAN?
Answer: Yes. We offer repairs for the 1365-PAN and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 1365-PAN?
Answer: If you buy the 1365-PAN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1365-PAN online?
Answer: Yes. Automation Stop sells the 1365-PAN online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1365-PAN?
Answer: The 1365-PAN is made by Allen Bradley - Drives.
For additional information about 1365-PAN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1365-PAN.
Revision Part # | Also Known As | Availability |
---|---|---|
1365-PAN/A | 1365-PAN Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.