GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1336-WB035

Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 1336-WB035
Series: 1336 Adjustable

Description:

Allen-Bradley Dynamic Brake Chopper with 380/415/460V AC Voltage Ratings and 750V DC Continuous Voltage Ratings. It includes F1 and F2 fuses, as well as a TTL-compatible brake fault. Due to its 750 Volt DC continuous Ampere rating, the 1336-WB035 qualifies as an open type assembly, allowing for the inclusion of user-supplied brake resistors to increase the module's braking torque capabilities. The Allen-Bradley 1336-WB035 is equipped with two (2) indicators that are labeled "Brake On" and DC Power."


Key Features:

  • has been discontinued/obsolete
  • has 380/415/460v ac voltage rating

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 1336-WB035 is an Allen-Bradley Dynamic Brake Chopper with an AC voltage rating of 380/415/460 Volts. It includes F1 and F2 fuses, as well as a TTL-compatible brake fault. Because of its 750 Volt DC continuous ampere rating, the 1336-WB035 qualifies as an open type assembly, allowing for the inclusion of user-supplied brake resistors to increase the module's braking torque capabilities. If the present rating is insufficient for the application, these are meant to be used in conjunction with it. One of the modules is the master dynamic brake module, while the others are known as follower modules. The working status of the module is indicated by two indicator lights positioned on the front of the enclosure. These two indicators are labeled "Brake On" and "DC Power." The high-speed analogue inputs on the 1336-WB035 unit help to improve drive responsiveness to speed or torque instructions, as does the integrated process PI control, which removes the need for a separate process loop controller. This device's flying start function allows for a smooth connection to spinning loads. Its inertia ride-through technique uses rotational energy stored in high inertia to provide triple-free operation after a protracted power outage. The torque prove offers load management when switching control from a mechanical brake to a motor. It also has torque control capabilities including encoder feedback for +/-2 percent torque adjustment and the ability to hold the whole load at zero speed. This module's programming flexibility allows for the connecting of parameters to the drive. When installing dynamic brake enclosures, put them vertically and outside of another cabinet.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1336-WB035?

Answer: Yes. We offer repairs for the 1336-WB035 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 1336-WB035?

Answer: If you buy the 1336-WB035 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1336-WB035 online?

Answer: Yes. Automation Stop sells the 1336-WB035 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1336-WB035?

Answer: The 1336-WB035 is made by Allen Bradley - Drives.


Question: What type of product is the 1336-WB035?

Answer: The 1336-WB035 is part of the 1336 Adjustable series.


Question: What voltage does the 1336-WB035 have?

Answer: The 1336-WB035 includes a voltage of 460.


Series information for 1336-WB035

For additional information about 1336-WB035 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1336-WB035.

Revision Part # Also Known As Availability
1336-WB035/A 1336-WB035 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1336-WB03S
  • 1336-WBO35
  • 1336-WBO3S
  • 1336-W8035
  • 1336-W803S
  • 1336-W8O35
  • 1336-W8O3S
  • 133G-WB035
  • 133G-WB03S
  • 133G-WBO35
  • 133G-WBO3S
  • 133G-W8035
  • 133G-W803S
  • 133G-W8O35
  • 133G-W8O3S
  • I336-WB035
  • I336-WB03S
  • I336-WBO35
  • I336-WBO3S
  • I336-W8035
  • I336-W803S
  • I336-W8O35
  • I336-W8O3S
  • I33G-WB035
  • I33G-WB03S
  • I33G-WBO35
  • I33G-WBO3S
  • I33G-W8035
  • I33G-W803S
  • I33G-W8O35
  • I33G-W8O3S

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP