GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1336-L8E

✓ In Stock

1336-L8E Image 1 thumbnail
1336-L8E Image 2 thumbnail
1336-L8E Image 3 thumbnail
1336-L8E Image 4 thumbnail
1336-L8E Image 5 thumbnail
Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 1336-L8E
Series: 1336 Adjustable

Description:

The 1336L8E is a control interface that is branded and manufactured by Allen-Bradley and Rockwell Automation. It is a 24 Volt AC/DC interface board with encoder and loss detection.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Allen-Bradley’s 1336L8E is an encoder loss detection-based control interface board. The voltage rating is 24Volts AC/DC. This control interface comes with an encoder feedback system. It is used with the Bulletin 1336 drives. The 1336-L8E interface is a logic control interface that connects various drive functions with the help of AC/DC signals. The current rating required for the interface board operation is 24 Volts AC/DC. The board also comprises two (2) plugin connectors. These connectors help with connecting the main control board connector jumpers. This control interface board is C-tick certified.

As the interface board comes with an encoder feedback system, it serves as a distinguished control interface board. This unique encoder feedback helps with the detection of signal losses. In addition, it has optional features including programming. This option allows the users to alter or configure the inputs that meet their needs or applications. The certifications and standards met by the 1336-L8E include KC, CE, CE-LVD, and CE-EMC compliance. Compatibility features include the 1336-L8E control interface board, compatibility with 1336 Plus II and 1336 Impact devices, well suited nature with circuits that are capable of high-true logic operations, 1771 compatibility, as well as suitability with circuits that have a maximum of 8 Volts DC and 1.5 milliamperes. This interface board has 12 terminals and 9 control inputs. It can be used as both command input signals or interface common signals. The operating voltage of the interface board ranges from 20 to 26 Volts DC (high-state) and has a current rating of 10 milliamperes.

Technical Specifications

Manufacturer Rockwell Automation
Brand Allen-Bradley
Input Voltage 24 VDC/VAC
Special Feature Encoder with Loss Detection
Alternate Part Numbers 1336-L8E/A, Series A, Rev A
Mounting Internal
Weight 0.14 Kilograms
Input Type Differential Encoder Input (Optical)
Low State Compatibility 8 VDC and 1.5 milliamperes
High State Compatibility 20 - 26 VDC and 10 milliamperes
Certifications CE and KE certified
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1336-L8E?

Answer: Yes. We offer repairs for the 1336-L8E and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 1336-L8E?

Answer: If you buy the 1336-L8E through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1336-L8E online?

Answer: Yes. Automation Stop sells the 1336-L8E online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1336-L8E?

Answer: The 1336-L8E is made by Allen Bradley - Drives.


Question: What type of product is the 1336-L8E?

Answer: The 1336-L8E is part of the 1336 Adjustable series.


Question: What Alternate component Numbers does the Allen-Bradley 1336-L8E have?

Answer: The Allen-Bradley 1336-L8E has a Alternate unit Numbers of 1336-L8E/A, Series A, Rev A .


Question: What Brand does the Rockwell Automation 1336-L8E have?

Answer: The Rockwell Automation 1336-L8E has a Allen Bradley (AB) Brand.


Question: What Certifications are included with the 1336-L8E?

Answer: The 1336-L8E includes CE and KE certified for its Certifications.


Question: What is the High State Compatibility of the 1336-L8E?

Answer: The 1336-L8E has a High State Compatibility of 20 - 26 VDC and 10 milliamperes .


Question: What Input Type is included with the 1336-L8E?

Answer: The Rockwell Automation 1336-L8E has a Differential Encoder Input (Optical) Input Type.


Question: What is the Input Voltage of the 1336-L8E?

Answer: The 1336-L8E has a Input Voltage of 24 VDC/VAC (voltage alternating current) .


Question: What is the Low State Compatibility of the 1336-L8E?

Answer: The Low State Compatibility of the Rockwell-Automation 1336-L8E is 8 VDC and 1.5 milliamperes .


Question: What Mounting is included with the Allen Bradley 1336-L8E?

Answer: The Allen Bradley 1336-L8E has a Internal Mounting.


Question: What Special Feature does the Allen Bradley-Rockwell Automation 1336-L8E have?

Answer: The Allen Bradley-Rockwell Automation 1336-L8E has a Encoder with Loss Detection Special Feature.


Question: What Weight does the Rockwell-Automation 1336-L8E have?

Answer: The 1336-L8E has a Weight of 0.14 Kilograms .


Series information for 1336-L8E

For additional information about 1336-L8E check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1336-L8E.

Revision Part # Also Known As Availability
1336-L8E/A 1336-L8E Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1336-LBE
  • 133G-L8E
  • 133G-LBE
  • I336-L8E
  • I336-LBE
  • I33G-L8E
  • I33G-LBE

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP